1. Technical Specifications: Splitter Series (Brazil Spec)
| Parameter Description | Specification Detail | Conformité aux normes |
|---|---|---|
| Nominal Input Power (HP) | 180 – 450 HP (Heavy Duty) | ISO 6336 |
| Input Speed (RPM) | 540 / 1000 RPM | DIN 9611 |
| Maximum Output Torque (Nm) | 8,500 Nm – 12,400 Nm | AGMA 6013 |
| Plage de rapports de démultiplication | 1:1.24 to 1:2.85 (Increaser/Reducer) | Internal Opt. |
| Output Shaft Configuration | 1 3/4″ Z20 / 1 3/8″ Z6 / Z21 | SAE J498 |
| Number of Output Ports | 2 to 4 (Parallel or 90°) | Custom Modular |
| Lubrication Type | EP90 / ISO VG 220 Synthetic | API GL-5 |
| Thermal Capacity (Continuous) | 95 kW (at 40°C ambient) | ISO/TR 14179 |
| Matériaux de construction | QT450-10 Ductile Iron | ASTM A536 |
| Operating Temperature Range | -15°C to +110°C | Extreme Field Test |
| Seal Protection Rating | IP67 (Dual-lip Viton Seals) | CEI 60529 |
| Fatigue Life (L10 Bearing) | 5,000 – 8,000 Hours | ISO 281 |
| Seuil de vibration | < 4.5 mm/s (RMS) | ISO 10816 |
| Backlash (Standard) | 12′ – 18′ (arcmin) | DIN 3967 |
| Coating Standards | Epoxy Anti-corrosion (UV Resistant) | ISO 12944 |
2. [Brazil] National Standards & Certification Landscape for Agricultural Drivetrain Components
Operating in Brazil requires more than just high torque; it requires strict adherence to local safety and environmental regulations. The NR-12 (Norma Regulamentadora 12) is the fundamental law governing machinery safety in Brazil. Our splitter gearboxes are designed to facilitate compliance with NR-12 by providing integrated mounting points for safety guards and emergency shut-off sensors. Furthermore, for components entering the Brazilian supply chain, alignment with ABNT (Associação Brasileira de Normas Técnicas) standards for splines and shaft tolerances is critical. ever-power ensures that every output shaft precisely matches the metric and imperial requirements commonly found in equipment manufactured by local giants like Stara, Jacto, et Baldan.
Dans le cadre de la Mato Grosso region, where the “Safrinha” (second corn crop) follows the main soybean harvest, the window for combined tillage is extremely narrow. Soil temperatures can reach 50°C at the surface, which causes standard mineral oils to lose viscosity rapidly. Based on our 15-year field study in Sorriso, MT, we have optimized our gearbox thermal ratings by increasing the external fin surface area by 25%. This “Brazil-Tropicalized” design prevents oil aeration and foaming, which are the primary causes of gear pitting in multi-gearbox tillage configurations.
3. Engineer’s Field Notes: The Architecture of Reliability
“When we designed the Splitter-X Series for Agrinulear Nucleo Agro, we didn’t start in the CAD office; we started in a muddy trench in Rio Grande do Sul. We observed that most splitter boxes failed not because they weren’t strong enough, but because the internal oil circulation was blocked during steep incline work on terraces. Our ‘Pressure-Flow’ internal lubrication channels were born from that specific Brazilian pain point. We utilized a trochoid pump integrated directly onto the input shaft to ensure that even at a 15-degree incline, the top bearings receive a constant curtain of cooled lubricant. This is the difference between an ‘off-the-shelf’ box and a solution built for the real world.” — Chief Engineer, ever-power R&D.
Innovation at ever-power extends to material science. We have transitioned from standard grey iron to High-Tensile Spheroidal Graphite Iron (QT450-10) for the main housing. This material offers the damping properties of cast iron with the fracture toughness approaching that of steel. In a combined tillage machine, where the splitter box is subjected to harmonically complex vibrations from different tool gangs, this material prevents the micro-cracking that often leads to catastrophic failure in competitive products.
4. Competitive Benchmarking: Ever-Power vs. Global Tiers
| Fonctionnalité | ever-power (Agrinulear) | European Premium Brands | Standard Aftermarket |
|---|---|---|---|
| Seal Longevity | Viton Dual-Lip (Tropicalized) | Norme NBR | Single Lip Rubber |
| Shaft Material | 20CrMnTi (Forged) | 42CrMo | Carbon Steel |
| Heat Dissipation | Active Fin Array + Pump | Passive Housing | Smooth Surface |
| Lead Time (Brazil) | Local Stock / 4-6 Weeks | 12-20 Weeks | Variable |
Disclaimer: All competitor names and brands are for reference only. Our products are independent engineering solutions designed for compatibility.
5. Interchangeability & Brand Compatibility
Our splitter gearboxes are designed as high-performance upgrades for existing combined tillage platforms. We provide mounting patterns and shaft configurations that can seamlessly replace or retrofit units found in equipment from:
- John Deere (Tillage Series)
- Kuhn (Multi-Leader / Krause)
- Maschio Gaspardo
- Case IH (Tiger-Mate)
- Horsch (Tiger / Pronto)
- Amazon (Cenius)
- Tatu Marchesan (Brazil Domestic)
- Baldan (Heavy Duty Lines)
Note: All manufacturer names, trademarks, and part numbers are used for identification purposes only. Ever-power is not affiliated with these OEMs. Our components are aftermarket parts engineered to meet or exceed original specifications.
6. Global Customer Success Stories: Real-World Solutions
Case 1: The “Clay-Lock” Challenge in Mato Grosso, Brazil
Customer: Fazenda Boa Esperança (Commercial Soy Producer)
Pain Point: “Our 9-meter multi-tiller keeps shearing the main input shaft because the soil is so unpredictable. When the discs hit a dry clay vein, the gearbox casing literally flexes and ruins the alignment.”
Solution : We installed the Splitter-X HD 450 with a high-rigidity ductile iron housing and reinforced internal splines. We also integrated a slip-clutch PTO shaft to dampen the peak torque spikes.
Rétroaction “Since switching to the ever-power Agrinulear system, we finished the 2024 season with zero downtime. The thermal stability is what impressed us most—the oil stays clear and cool even in 40°C heat.”
Case 2: The Stony Soil Struggle in Western Australia
Customer: Western Grain Co-op
Pain Point: “Hidden limestone rocks were destroying our gear sets every 200 hours. The cost of replacement was killing our margins.”
Solution : ever-power provided gearboxes using 20CrMnTi alloy with a specific heat treatment that increases core toughness. We also recommended our safety-shielded PTO with shear-bolt protection.
Rétroaction “We’ve doubled our service life. The gear teeth no longer chip when they hit an obstacle.”
7. Pourquoi nous choisir ?
Solutions complètes: Nous comprenons l'importance de disposer de composants fiables et compatibles pour vos machines. En proposant à la fois des boîtiers de transmission agricoles et des arbres de prise de force, nous garantissons que chaque pièce fonctionne parfaitement ensemble, améliorant ainsi l'efficacité et réduisant les temps d'arrêt.
2. Conçu pour la durabilitéNos arbres de prise de force sont construits avec des matériaux de haute qualité pour résister aux conditions de travail les plus difficiles. Que vous alimentiez des équipements lourds ou que vous entreteniez des machines agricoles à petite échelle, nos arbres de prise de force vous offrent la robustesse et la fiabilité dont vous avez besoin.
3. Intégration transparente: Conçus pour compléter parfaitement nos boîtiers agricoles, nos arbres de prise de force assurent une transmission de puissance fluide, améliorant ainsi les performances globales de votre équipement. Cette intégration transparente vous permet de maximiser votre productivité et de réduire les défaillances mécaniques.
4. Options personnalisables: Nous proposons une large gamme d'arbres de prise de force, des configurations standard aux solutions personnalisées, afin de répondre à vos besoins spécifiques. Que vous travailliez dans l'agriculture, la construction ou tout autre domaine connexe, nous avons l'arbre de prise de force parfait pour vous.
5. RentableEn s'approvisionnant en boîtes de vitesses agricoles et en arbres de prise de force auprès d'un seul fournisseur, vous réalisez des économies et simplifiez votre processus d'achat. Nos produits sont conçus pour offrir une valeur durable, réduisant ainsi le besoin de remplacements fréquents.
6. Service et support fiablesNotre équipe d'experts est toujours disponible pour vous aider dans la sélection des produits, l'installation et les conseils d'entretien. Nous nous engageons à garantir le bon fonctionnement et l'efficacité de vos machines, afin que vous puissiez vous concentrer sur votre travail sans interruption.
8. Produits associés - Arbre de prise de force
Chez EVER-POWER, nous ne nous concentrons pas uniquement sur la production de boîtes de vitesses agricoles de haute qualité, mais aussi sur la fabrication d'un composant essentiel qui alimente diverses applications agricoles et industrielles – l'arbre de prise de force (arbre de PDF). Nos arbres de PDF sont conçus pour répondre aux exigences rigoureuses des équipements agricoles modernes, offrant durabilité et efficacité pour un large éventail d'opérations. Compatible avec les industries locales brésiliennes.
Nos types de produits d'arbres de prise de force comprennent : Prise de force pour andaineurs à disques, Prise de force pour mélangeurs d'aliments, Arbre de prise de force pour broyeurs à fléaux, Prise de force pour presses rondes, et Prise de force pour presses carrées.
Frequently Asked Questions (B2B & Engineering)
A1: Most failures are attributed to “Momentary Torque Overload” caused by unsynchronized rotor gangs or sudden soil density changes. This leads to gear tooth fatigue or shaft shearing. Our ever-power units mitigate this via superior metallurgical toughness and optimized tooth geometry that distributes the load across a wider surface area.
A2: Our gearboxes feature standardized mounting bosses for safety shields and non-contact rotation sensors. We provide the technical drawings necessary for your engineers to certify the complete machine under NR-12 guidelines.
A3: For the Brazilian Cerrado, we recommend a full synthetic API GL-5 75W-140 or a specialized ISO VG 220 gear oil with extreme pressure (EP) additives. This maintains a stable film even when internal temperatures reach 90°C.
A4: Yes, ever-power offers modular gear sets. We can adjust ratios from 1:1 up to 1:3 depending on your specific RPM requirements for vacuum blowers or mechanical seed meters.
Éditeur : PXY
