Descripción del producto
Spline Key Output PTO SDQWL31-46LGQ1 For WLY5TS40 Gearbox Power Take-off ( WLY Transmissions Power Take off)
(DFAC CZPT CZPT JAC CZPT Truck WLY Fast Transmissions Power Take off)
WanLiYang series power take off (WLY PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WL24/37 |
1.176 |
250 |
10H30 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WL24/38 |
1.077 |
3-01 connector. |
| Tell: tictrucks HangZhou City ZheJiang Province China | ||||
| Gearbox Factory | Gearbox Transmission Model tictrucks |
SZ OBM Model | Brief data PTO | |
| PTO ODM MODEL | Truck brand | |||
| HaChi Gearbox | C171757121-8C CA6-75AB19 CATS6-62 CA6T-123 6T120 JS6-550 TS6-53(Direct) | -8C | SDQ12/68 | FAW |
| HangZhou | C1 | FAW | ||
| HaChi Gearbox | TZ17-449 CA6T-138(FAW Eaton) | 6-74 | SDQ15/75 | FAW |
| Xihu (West Lake) Dis.feng | 17V20 17V70–Q17421(HangZhou) JC5-20T23(HangZhou) 17G0A8-LB27 17G0A88-QB80 17G1A8-20 17G0A5-EG05-B | SDQ23/30 | Furika | |
| LG | LG520Q3 LG525Q Mengwo170571-Q17571 MW525CL 17G0AB02 WLY520 | 525 | SDQ23/32 | FOTON Furika |
| SDQ33/32 | ||||
| YY | SYC07 170571-C64-E31121 TC5-30HKA20(Tangchi) TC5-30HFE9(Tangchi) YC5-30V06 LG535QHZJB1 | 1061 | SDQ23/37 | FOTON Furika |
| WLY | WLY5TS32-73–LD4-90651 17KW1-N9-N9-Q17421 | |||
| LC JAC | 2830.5 | SDQ42/27 | IVCO NAVECO | |
| LC JAC | LC6T35 | SDQ50/35 | JAC | |
| LC JAC | LC6T46(A2Q25) LC6T450MT(AZQ28) WLYZ6S46( ) | 646 | SDQ50/45 | FOTON AUMARK |
| WLY | WLY6S46 | 646 | SDQ50/69 | |
| LC JAC | LC6T540 15CO7571 | SDQ50/63 | JAC | |
| LC JAC | LC5T97 LC5T30( 6teeth) | 5T97 | SDQ50/71 | |
| LC JAC | LC5T400M1(A2Q08) | 5T35 | SDQ50/74 | FOTON Oling |
| NISSAN Z F5S400V | SDQ51/44 | NISSAN | ||
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | IUZU QINGLING | SDQ51/62 | IUZU QINGLING |
| ZheJiang | MSB-5M(A2Q05) LC5T88(6 teeth) | SUZU QINGLING | SDQ51/63 | SUZU QINGLING |
| DN3-70030-E0 6MT1420 | DN3 | SDQ51/65 | SUZU QINGLING | |
| ISZU QINGLING | MSB-5S/5M/5SM 5MT1280JD JC526T3D | 1571 5T88 | SDQ51/74 | JMC small |
| WLY | WLY5TS32C-58-32 | Xihu (West Lake) Dis.feng | ||
| WLY5TS32-31-32 | Xihu (West Lake) Dis.feng | |||
| HangZhou | JC528T8 | 1571 5T88 | SDQ51/67 | JMC |
| ZheJiang | ISZU MRB6P( EURO3) | SDQ52/74 | ISZU QINGLING | |
| ZheJiang | MRB6Q MLD6Q | 5T ISZU | SDQ52/77 | ISZU QINGLING |
| FAST | 8JS85E 17JK-G18569(JiangKai) | 85E | QD40A | FAST, Xihu (West Lake) Dis.feng |
| RT-11609A RT-11509C | SDQ211/70-A | Xihu (West Lake) Dis.feng, FAW,Xihu (West Lake) Dis.n IVCO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN Xihu (West Lake) Dis. Runze Special Vehicle |
||
| 17G0A9-22 9JS135T-B | SDQ211/70-1 | |||
| 9JS119T-B(170571-K14E3) | SDQ211/70-3 | |||
| 9JS119TA | SDQ211/70-4 | |||
| RTO-11609B RT-11509F | SDQ211/70-5 | |||
| 12JS160TA | SDQ212/70-1 | Xihu (West Lake) Dis.feng, Xihu (West Lake) Dis.n IVCO, Steyr, Auman, Northern Benz BEIBEN,JAC,SHCAMAN | ||
| 12JD160TA 12JD180T | SDQ212/70-2 | |||
| A5J38T | QC20A | FOTON | ||
| NAVECO | 17H30 | tictrucks | IVEVO NAVECO | |
Power take-off products
Model list of power take-off
FAW Xihu (West Lake) Dis. power take off (FAW PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-YQ12/68 |
1.24 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-YQ12/72 |
1.199 |
250 |
CA6T-123/TS6-53 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-YQ13/70 |
1.08 |
300 |
CATS6-75A/1700940-680 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-YQ15/75 |
1.006 |
350 |
CATS6-75(74), TZ1700940H4G,CA6T-138 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-YQ15/52 |
1.179 |
400 |
CA6T138 |
Internal spline / flange |
Pneumatic (dynamic clutch) |
Xihu (West Lake) Dis.feng series power take off (DF PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-DF21/33 |
1.044 |
250 |
17C-00030,17G0A4-08, |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-DF22/47 |
1.2 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-DF22/47-A |
1.03 |
600 |
Dt0690 overdrive |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-DF24/42 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-DF24/42-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-DF24/45 |
1.2 |
600 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-DF24/45-B |
1.03 |
450 |
DF6S900 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-DF24/65 |
1.06 |
400 |
DF6S-750 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-DF24/64 |
1.06 |
400 |
DF6S750/DF6S650 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-DF24/69 |
1.211 |
350 |
17K1/17KT6K-00030, 17K17-00030/17G1A7-15, 17K23-00030/17G0A7-15 |
Internal spline / flange |
Pneumatics |
|
11 |
SDQ-DF25/63 |
1.23 |
350 |
17G1A7-41/17F40(44/62) /17g0a7-21 (41) / jiangft 650H |
Internal spline / flange |
Pneumatics |
|
12 |
SDQ-DF26/31 |
1.45 |
350 |
DC6J70T/17G0A3-08(09/15/ 25/96)/Zqc6t-75 / 750 |
Internal spline / flange |
Pneumatics |
|
13 |
SDQ-DF27/21 |
1.845 |
350 |
DC85JTZ/17G0Z56-571/17G 0A3-33(35/36)/17G571-N9 002/14G0A3-32(34) /DC6J85TZ |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-DF27/53 |
1.35 |
350 |
17G0A9-Z67D/DC7J100TB/1 7G0A9-45(-24-00030) |
Internal spline / flange |
Pneumatics |
|
15 |
SDQ-DF27/55 |
1.216 |
300 |
17g0a3-32 (33 / 34 / 35 / 36) straight Connecting gear / dc6j85tz (direct gear) |
Internal spline / flange |
Pneumatics |
|
16 |
SDQ-DF27/65 |
1.07 |
350 |
DC7J100TC,17G0A9-Z66D |
Internal spline / flange |
Pneumatics |
|
17 |
SDQ-DF27/66 |
1.26 |
350 |
Dc6j85tz (overdrive) /17G0A3-54/170571-A9000 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-DF28/55 |
1.3 |
400 |
17GOA3-38/17N29-00030 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-DF28/65 |
1.55 |
350 |
Dc7j120tb (overdrive) /01-00030 |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-DF28/72 |
1.84 |
350 |
Dc7j120tc (direct gear) /01-00030 |
Internal spline / flange |
Pneumatics |
Jac Xingrui series power take off (JAC)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-XR50/35 |
1 |
300 |
LC6T55 WLY6TS55 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-XR50/45 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-XR50/60 |
1.1435 |
300 |
LC6T540 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-XR50/63 |
1.11 |
300 |
LC6T540/15CO7571 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-XR50/65 |
1.6433 |
250 |
ML642A-A9 |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-XR50/67 |
1.1541 |
250 |
ML532A |
Internal spline / flange |
Pneumatic / manual |
|
7 |
SDQ-XR50/69 |
1.1 |
280 |
LC6T46/LC6T450 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-XR50/71 |
1.17 |
200 |
LC5T97/LC5T30 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-XR50/74 |
1.03 |
200 |
LC5T35/LC5T40 |
Internal spline / flange |
Pneumatics |
|
10 |
SDQ-XR23/55 |
1.12 |
300 |
LC6T450M1 |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-XR37/77 |
1.55 |
200 |
ML532C |
Internal spline / flange |
Pneumatic / manual |
Qingling Iuzu series power take off (Iszu PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WS51/62 |
1.3 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WS38/63 |
1 |
150 |
Msb-5m / starray lc5t88 |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-WS32/64 |
1.095 |
300 |
MYY-6S |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-WS35/74 |
1.63 |
180 |
MSB-5M/MSB-5S/MSB-5SM/LC5T88
LC5T25/LC5T255M3/LC5T28 |
Internal spline / flange |
Pneumatic / manual vacuum |
|
5 |
SDQ-WS52/77 |
1.18 |
250 |
MLD-6Q/MLD6A |
Internal spline / flange |
Pneumatics |
JMC series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-GT32/65 |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
2 |
SDQ-GT51/67 |
1.2 |
200 |
JC5T28/5T26.5/MTI280JD |
Internal spline / flange |
Pneumatic / manual |
|
3 |
SDQ-GT32/65-A |
1.315 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
4 |
SDQ-GT32/65-B |
1.09 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
|
5 |
SDQ-GT32/65-C |
1.26 |
250 |
6MT1420/DN3-70030-E0/KN3 |
Internal spline / flange |
Pneumatic / manual |
Z F series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-Z F51/38 |
1.077 |
300 |
Z F6S500/Z F6S600/Z F6S558 Z F6S508/Z F6S458 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-Z F51/44 |
1 |
250 |
Z F5S400 |
Internal spline / flange |
Manual |
|
3 |
SDQ-Z F48/39 |
1.063 |
250 |
Z F5S408/Z F5S328 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-Z F211/65 |
0.772 |
650 |
TraXon12 |
Internal spline / flange |
Pneumatics |
Fast PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-FS212/70 |
0.94 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-FS212/70-A |
0.78 |
600 |
12JSD160TA |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-FS19/31 (QD40A) |
1.09 |
400 |
8JS75 |
Internal spline |
Pneumatics |
|
4 |
SDQ-FS24/37 ( QCZ70A) |
0.93 |
600 |
6J80T |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-FS211/60 |
1.1 |
350 |
FAST ETON |
Internal spline / flange |
Pneumatics |
|
6 |
SDQ-FS211/70 |
0.94 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-FS211/70-A |
0.78 |
600 |
Fuller / fast / rt-11509c 8JS100S/17G0A9-22 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-FS34/29 |
400 |
8JS75 |
Internal spline / flange |
Pneumatics |
WanLiYang series power take off (WLY PTO)
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-WL24/37 |
1.176 |
250 |
10H30 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-WL24/38 |
1.077 |
300 |
6G55 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-WL24/40 |
1.333 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-WL31/39 |
1.1 |
300 |
6G40A |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-WL24/43 |
1.087 |
300 |
5G40 |
Internal spline / flange |
Pneumatic / manual / vacuum |
|
6 |
SDQ-WL24/44 |
1.043 |
300 |
6G40B |
Internal spline / flange |
Pneumatics |
|
7 |
SDQ-WL24/59 |
1.094 |
300 |
6G120/6G70 |
Internal spline / flange |
Pneumatics |
|
8 |
SDQ-WL24/60 |
1.3 |
300 |
6TS40 |
Internal spline / flange |
Pneumatics |
|
9 |
SDQ-WL24/63 |
1.39 |
180 |
5TS32 |
Internal spline / flange |
Pneumatic / manual |
|
10 |
SDQ-WL 24/63-B |
1.39 |
180 |
5G32A |
Internal spline / flange |
Pneumatic / manual |
|
11 |
SDQ-WL 24/66 |
1.359 |
180 |
5TS32-C |
Internal spline / flange |
Pneumatic / manual |
|
12 |
SDQ-WL 24/66-B |
1.146 |
180 |
5G32B/5G32C |
Internal spline / flange |
Pneumatic / manual |
|
13 |
SDQ-WL 24/67 SDQ-WL 25/67 |
1.147 |
300 |
6T120/6S46/6S51 |
Internal spline / flange |
Pneumatics |
|
14 |
SDQ-WL 24/70 |
1.15 |
200 |
6S46B (2015-4-25) |
Internal spline / flange |
Pneumatic / manual |
|
15 |
SDQ-WL 24/71 SDQ-WL 25/71 |
1.11 |
300 |
6S51B/6S46B |
Internal spline / flange |
Pneumatic / manual |
|
16 |
SDQ-WL 24/72 |
1.133 |
300 |
6TS55E/6TS60 |
Internal spline / flange |
Pneumatic / manual |
|
17 |
SDQ-WL23/63 |
1.35 |
350 |
10H46 |
Internal spline / flange |
Pneumatics |
|
18 |
SDQ-WL23/71 |
1.15 |
400 |
7TS60 |
Internal spline / flange |
Pneumatics |
|
19 |
SDQ-WL24/75 |
1 |
400 |
7TS60B |
Internal spline / flange |
Pneumatics |
|
20 |
SDQ-WL25/70 |
1.244 |
400 |
7TS60C |
Internal flange / spline |
Pneumatics |
|
21 |
SDQ-WL24/73 |
1.07 |
400 |
7TS60D |
Internal spline / flange |
Pneumatics |
|
22 |
SDQ-WL25/33 |
1.228 |
350 |
10h46 (right) |
Internal spline / flange |
Pneumatics |
|
23 |
SDQ-WL27/70 |
1.08 |
150 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
24 |
SDQ-WL31/46 |
1.2 |
180 |
5TS40 |
Internal spline / flange |
Pneumatics |
|
25 |
SDQ-WL211/100 |
1 |
1000 |
9G90 |
Internal spline / flange |
Pneumatics |
SINOTRUCK CZPT PTO power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-ZD27/61 |
1.1 |
600 |
DC7J120T |
Flange flange |
Pneumatic (dynamic clutch) |
|
2 |
HW50 |
0.739 |
500 |
HW14710/HW18710 HW15710/HW19710 |
Internal flange / spline |
Pneumatics |
|
3 |
HW70 |
0.793 |
700 |
HW18709/HW18710 |
Internal spline / flange |
|
|
4 |
HW80Q-F301 |
800 |
HW9571C1 |
Flange flange |
Pneumatics |
|
|
5 |
HW140Q-F301 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
6 |
HW140Q-F302 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
7 |
HW140Q-F303 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
8 |
HW140Q-F305 |
0.84 |
1400 |
HW12706 |
Flange flange |
Pneumatics |
|
9 |
HW60Q-F300 |
0.686 |
600 |
HW12706 |
Flange flange |
Pneumatics |
Other series of power take-off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-HL211/65 |
0.772 |
650 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-HL211/100 |
1 |
1000 |
Soda gearbox 12sob1500 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-NQ42/26 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
4 |
SDQ-NQ42/27 |
1.15 |
150 |
NAC 2830.5 |
Internal spline / flange |
Pneumatics |
|
5 |
SDQ-SQ42/77 |
1.13 |
300 |
SAIC sc50m6d |
Internal spline / flange |
Pneumatics |
New energy Electric Power Truck series power take off PTO
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
SDQ-LK31/38 |
1.043 |
300 |
HangZhou green control 6s100 |
Internal spline / flange |
Pneumatics |
|
2 |
SDQ-LK24/36 |
1.136 |
300 |
HangZhou green control j6s95 |
Internal spline / flange |
Pneumatics |
|
3 |
SDQ-LK20/56 |
1.148 |
300 |
HangZhou green control j2s130 |
Internal spline / flange |
Pneumatics |
Export series power take off
|
Serial number |
Model of power take-off |
speed ratio |
Output torque (N.m) |
Matching gearbox |
Output mode |
control mode |
|
1 |
Pto1000 series |
0.6- 1.88 |
300 |
EATON FS 3005/4005 EATON 6305 |
Internal flange / spline |
Pneumatics |
|
2 |
Pto2000 series |
0.6- 1.88 |
350 |
Eaton fuller CZPT rt-11109a / rt-6609a rt-7608a Allison Ellison M-5600/M-6600/S-5600 S-6600 |
Internal spline / flange |
Pneumatics |
|
3 |
3131(BZ) |
0.84-2.9 4 |
450 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
4 |
3252(BZ) |
0.81-1.8 5 |
300 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
5 |
3151(BZ) |
0.84-2 |
540 |
Allison Ellison MD-3000/MD-4000 |
Internal spline / flange |
Constant mesh |
|
6 |
3300 |
0.74-1 |
390 |
Allison Ellison MD-1000/MD-2000 |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
7 |
PTO852 |
1.13 |
650 |
Allison |
Internal spline / flange |
Hydraulic (dynamic clutch) |
|
8 |
103K_03(BZ) |
0.77-0.55 |
650 |
S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
|
9 |
1571K_03 (BZ) |
0.76 |
420 |
Z F S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
ZheJiang Xihu (West Lake) Dis. Runze Special Vehicle
Certifications
Packaging & Shipping
PREGUNTAS FRECUENTES
1.Are you trading company or manufacturer ?
We are Group Corporation manufacturer ,have Group Factories Contractor.
2 .Can I have samples of this type of product to test the quality?
Yes, you can buy any sample to test the quality,our MOQ is 1 unit.
3. What’s the delivery time and can you lower the price?
It depends on your order.The delivery time is within 30 workdays after we received your prepayment. If you have placed an order of large quantities, then,of course, the price can be lowered.
4.Can you supply some quick-wear parts?
Yes, we can supply the parts as your request,such as traction,traction pin,balance beam and plate spring,hanging accessories,turntable,all kinds of brake pads,brake pan, bearings,etc.
6.Do you have any used products for sale?
We have products in stock for choices,the prices are favorable,we’ll show you our stock products if you need.
7.What’s the payment terms?
TT 30% as deposit, balance before shipment by TT or at sight.
8. How to guarantee customers get the goods smoothly after they payment?
Don’t worry,dear.We have joined the trade assurance,you can place the order by trade assurance,if we don’t delivery products, the deposit will be returned to you.
9.How can you ensure the quality of the products?
Don’t worry,dear.We have joined the trade assurance,if the products have quality problems when you received them,the payments can be refund to you.
parking of vehicles.
HWP type Power Take-Off
| No | PTO Model | Relación | Torque | Transmission | Output Mode | Control | Position |
| 1 | HWP-X23/55CHQ | 1.1206 | 300N.M | LC6T450M1 | Spline | Pneumatic | Side |
| 2 | HWP-X23/55TQ | 1.1206 | 300N.M | LC6T450M1 | Flange | Pneumatic | Side |
| 3 | HWP-X30/71CHQ | 1.5517 | 250N.M | LC5T30 | Spline | Pneumatic | Side |
| 4 | HWP-X30/71TQ | 1.5517 | 260N.M | LC5T30 | Flange | Pneumatic | Side |
| 5 | HWP-X31/63CHQ | 1.1099 | 300N.M | LC6T540 | Spline | Pneumatic | Side |
| 6 | HWP-X31/63TQ | 1.1099 | 300N.M | LC6T540 | Flange | Pneumatic | Side |
| 7 | HWP-X31/74CHQ | 1.5621 | 250N.M | LC5T40 | Spline | Pneumatic | Side |
| 8 | HWP-X31/74TQ | 1.5621 | 250N.M | LC5T40 | Flange | Pneumatic | Side |
| 9 | HWP-I35/62CHS | 1.2971 | 200N.M | MSB-5M | Spline | Manual | Side |
| 10 | HWP-I35/62TS | 1.2971 | 200N.M | MSB-5M | Flange | Manual | Side |
| 11 | HWP-X35/65CHQ | 1.6433 | 250N.M | ML642A | Spline | Pneumatic | Side |
| 12 | HWP-X35/65TQ | 1.6433 | 250N.M | ML642A | Flange | Pneumatic | Side |
| 13 | HWP-X35/65CHQ-A | 1.096 | 250N.M | ML642A | Spline | Pneumatic | Side |
| 14 | HWP-X35/65TQ-A | 1.096 | 250N.M | ML642A | Flange | Pneumatic | Side |
| 15 |
HWP-I35/74CHQ |
1.8 |
250N.M |
MSB-5M |
Spline |
Pneumatic |
Side |
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| 16 |
HWP-I35/74TQ |
1.8 |
250N.M |
MSB-5M |
Flange |
Pneumatic |
Side |
| 1.536 | LC5T88 | ||||||
| 1.82 | LC5T28 | ||||||
| 17 |
HWP-I35/74CHS |
1.8 |
250N.M |
MSB-5M |
Spline |
Manual |
Side |
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| 18 |
HWP-I35/74TS |
1.8 | MSB-5M |
Flange |
Manual |
Side |
|
| 1.536 | LC5T28 | ||||||
| 1.82 | LC5T88 | ||||||
| Note |
The above listed are the models and special specifications of common power take-off assemblies, or if you need to customize, please call for details. |
||||||
| Model Of Power Takeoff | Handling Out Method | Operation Mode | Speed Ratio | Rated Torque | Suitable Transmission Model |
| 01 WanLiYang series | |||||
| WLY525 | Internal spline | Manual, pneumatic | 1.56 | 200 | WLY525 CA525 |
| WLY525 | Protrusion connection | Manual, pneumatic | 1.56 | 200 | WLY525 CA525 |
| WLY5T32 | Internal spline | Manual, pneumatic | 1.46 | 150 | WLY5T26 5T32 |
| WLY5T32 | Protrusion connection | Manual, pneumatic | 1.46 | 150 | WLY5T26 5T32 |
| WLY5GS32 | Internal spline | Pneumatic | 1.5 | 150 | WLY5GS32 |
| WLY5GS32 | Protrusion connection | Pneumatic | 1.5 | 150 | WLY5GS32 |
| WLY6T46 | Internal spline | Pneumatic | 1.73 | 250 | WLY6T46 |
| WLY6T46 | Protrusion connection | Pneumatic | 1.73 | 250 | WLY6T46 |
| WLY6T40 | Internal spline | Pneumatic | 1.65 | 250 | WLY6T40 |
| WLY6T40 | Protrusion connection | Pneumatic | 1.65 | 250 | WLY6T40 |
| WLY5S100 | Internal spline | Pneumatic | 1.65 | 200 | WLY5S100 |
| WLY5S100 | Protrusion connection | Pneumatic | 1.65 | 200 | WLY5S100 |
| WLY540 | Internal spline | Pneumatic | 1.32 | 300 | WLY540 |
| WLY540 | Protrusion connection | Pneumatic | 1.32 | 300 | WLY540 |
| WLY526 | Internal spline | Pneumatic | 1.43 | 200 | WLY526 |
| WLY526 | Protrusion connection | Pneumatic | 1.56 | 200 | WLY5T26 |
| WLY530 | Internal spline | Pneumatic | 1.63 | 200 | WLY5-30 |
| WLY530 | Protrusion connection | Pneumatic | 1.63 | 200 | WLY5-30 |
| WLY535 | Internal spline | Pneumatic | 1.42 | 200 | WLY5-35 |
| WLY535 | Protrusion connection | Pneumatic | 1.42 | 200 | WLY5-35 |
| WLY5T97 | Internal spline | Pneumatic | 1.46 | 150 | WLYT92 |
| WLY5T97 | Protrusion connection | Pneumatic | 1.46 | 150 | WLYT92 |
| WLY6T100 | Internal spline | Pneumatic | 1.68 | 250 | WLY6T100-8 |
| WLY6T100 | Protrusion connection | Pneumatic | 1.68 | 250 | WLY6T100-8 |
| WLY653 | Internal spline | Pneumatic | 1.68 | 250 | WLY653 |
| WLY653 | Protrusion connection | Pneumatic | 1.68 | 250 | WLY653 |
| WLY650 | Internal spline | Pneumatic | 1.57 | 300 | WLY650 |
| WLY650 | Protrusion connection | Pneumatic | 1.57 | 300 | WLY650 |
| WLY8S85E | Internal spline | Pneumatic | 1.37 | 300 | WLY8S85 |
| WLY8S85E | Protrusion connection | Pneumatic | 1.37 | 300 | WLY8S85 |
| WLY5T88 | Internal spline | Pneumatic | 1.56 | 250 | WLY5T26 |
| WLY5T88 | Protrusion connection | Pneumatic, manual | 1.56 | 150 | WLY5T26 |
| 02 monvo series | |||||
| MW515JB | End key | Chang He | 1.93 | 120 | MW515 MW517 |
| MW515JB-H | spline | Chang He | 1.93 | 120 | MW515 MW517 |
| MW515EQF | End key | Manual | 1.93 | 120 | MW515 MW517 |
| MW515EQF | Protrusion connection | Manual | 1.93 | 120 | MW515 MW517 |
| MW520GAEC | End key | Chang He | 1.86 | 120 | MW520GA |
| MW520GE | End key | Chang He | 1.86 | 120 | MW520GE |
| MW520GAHB4-4 | End key | Chang He | 1.86 | 120 | MW520GAHB |
| MW520F-2 | Single bond | Manual | 1.72 | 180 | MW520 |
| MW520F1-3 | Internal spline | Manual, pneumatic | 1.72 | 180 | MW520 |
| MW520F2 | Protrusion connection | Manual, pneumatic | 1.72 | 180 | MW520 |
| MR70 | End key | Manual | 1.79 | 150 | MR70 |
| MR70 | Protrusion connection | Manual | 1.79 | 150 | MR70 |
| MT78Q | Internal spline | Manual, pneumatic | 1.67 | 200 | MT78Q |
| MT78Q | Protrusion connection | Manual, pneumatic | 1.67 | 200 | MT78Q |
| MR78 | Internal spline | Manual | 1.83 | 200 | MR78 |
| MR78 | Protrusion connection | Manual | 1.83 | 200 | MR78 |
| MT85Q-2 | Internal spline | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85Q-2 | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85EC3 | Internal spline | Manual, pneumatic | 1.62 | 250 | MT85 |
| MT85EC3 | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MT85 |
| MR85Q | Internal spline | Manual, pneumatic | 1.62 | 250 | MR85 |
| MR85Q | Protrusion connection | Manual, pneumatic | 1.62 | 250 | MR85 |
| MR85E | Internal spline | Manual, pneumatic | 1.72 | 250 | MR85 |
| MR85E | Protrusion connection | Manual, pneumatic | 1.72 | 250 | MR85 |
| MR78QF | Internal spline | Manual, pneumatic | 1.67 | 200 | MR78Q |
| MR78QF | Protrusion connection | Manual, pneumatic | 1.67 | 200 | MR78Q |
| MW525F-1 | End key | Manual | 1.42 | 250 | MW525F1-3 |
| MW520QDL | Internal spline | Manual, pneumatic | 1.42 | 250 | MW520 |
| MW520QDA | Protrusion connection | Manual, pneumatic | 1.42 | 250 | MW520 |
| 03 Xihu (West Lake) Dis.feng series | |||||
| DF5S300 | Internal spline | Pneumatic | 1.57 | 250 | DF5S300 |
| DF5S300 | Protrusion connection | Pneumatic | 1.57 | 250 | DF5S300 |
| DF5S40 | Internal spline | Pneumatic | 1.49 | 300 | DF5S40 |
| DF5S40 | Protrusion connection | Pneumatic | 1.49 | 300 | DF5S40 |
| DF5S550 | Internal spline | Pneumatic | 1.47 | 300 | DF5S550 |
| DF5S550 | Protrusion connection | Pneumatic | 1.47 | 300 | DF5S550 |
| DF5S600 | Internal spline | Pneumatic | 1.53 | 300 | DF5S600 |
| DF5S600 | Protrusion connection | Pneumatic | 1.53 | 300 | DF5S600 |
| DF6S650 | Internal spline | Pneumatic | 1.57 | 300 | DF6S650 |
| DF6S650 | Protrusion connection | Pneumatic | 1.57 | 300 | DF6S650 |
| DF6S900 | Internal spline | Pneumatic | 1.58 | 350 | DF6S900 |
| DF6S900 | Protrusion connection | Pneumatic | 1.58 | 350 | DF6S900 |
| 04 Xihu (West Lake) Dis.i series | |||||
| LC5T88 | Internal spline | Pneumatic, manual | 1.56 | 150 | QL15C-04/SDQ51 |
| LC5T88 | Protrusion connection | Pneumatic, manual | 1.56 | 150 | QL15C-02 |
| LC5T26 | Internal spline | Pneumatic, manual | 1.63 | 150 | QL15C-03 |
| LC5T26 | Protrusion connection | Pneumatic, manual | 1.63 | 150 | QL15C-03 |
| LC5T97 | Internal spline | Pneumatic, manual | 1.57 | 200 | QL15A-01 |
| LC5T97 | Protrusion connection | Pneumatic, manual | 1.57 | 200 | QL15A-01 |
| MSB-5M | Internal spline | Manual | 1.56 | 150 | QL15C-02 |
| MSB-5M | Protrusion connection | Manual | 1.56 | 150 | QL15C-02 |
| LC6T46 | Internal spline | Manual | 1.79 | 250 | SDQ50/69LGQ1 |
| LC6T46 | Protrusion connection | Manual | 1.79 | 250 | SDQ50/69PQ1 |
| LC6T55 | Internal spline | Manual | 1.56 | 300 | QL30M-01 |
| LC6T55 | Protrusion connection | Manual | 1.56 | 300 | QL30M-01 |
| LC6T450 | Internal spline | Manual | 1.47 | 300 | QL30E-06 |
| LC6T450 | Protrusion connection | Manual | 1.47 | 300 | QL30E-06 |
| LC6T540 | Internal spline | Pneumatic | 1.47 | 300 | HWP-X31/63TQ |
| LC6T540 | Protrusion connection | Pneumatic | 1.47 | 300 | HWP-X31/63TQ |
| LC5T400 | Internal spline | Pneumatic | 1.53 | 300 | SDQ50/74PQ1 |
| LC5T400 | Protrusion connection | Pneumatic | 1.53 | 300 | QL15D-06 |
| LC5T150 | Internal spline | Pneumatic | 1.43 | 300 | QL12J |
| LC5T150 | Protrusion connection | Pneumatic | 1.43 | 300 | QL12J-01 |
| LC5T28 | Internal spline | Pneumatic | 1.57 | 200 | HWP-T38/63CHQ |
| LC5T28 | Protrusion connection | Pneumatic | 1.57 | 200 | HWP-T38/63CHQ |
| LC5T190 | Internal spline | Pneumatic | 1.63 | 300 | QL12G/QL12G-02 |
| LC5T190 | Protrusion connection | Pneumatic | 1.63 | 300 | QL12G/QL12G-02 |
| LC5T30 | Internal spline | Pneumatic | 1.49 | 200 | SDQ50/71LGQ1 |
| LC5T30 | Protrusion connection | Pneumatic | 1.49 | 200 | SDQ50/71PQ1 |
| ML642 | Internal spline | Pneumatic | 1.51 | 300 | SDQ5065PS-B |
| ML642 | Protrusion connection | Pneumatic | 1.51 | 300 | SDQ5065PS-B |
| 05 ZheJiang fast | |||||
| 8JS85E | Internal spline | Pneumatic | 1.26 | 300 | 8JS85E |
| 8JS85F | Internal spline | Pneumatic | 1.32 | 300 | 8JS85F |
| 8JS85C | Internal spline | Pneumatic | 1.17 | 300 | 8JS85C |
| 8JS60T | Internal spline | Pneumatic | 1.42 | 300 | 6DS60T |
| 8JS118 | Internal spline | Pneumatic | 1.53 | 350 | 8JS118 |
| 8JS119 | Internal spline | Pneumatic | 1.53 | 350 | 9JS119 |
| 06 heavy truck series | |||||
| DC5J80 | Internal spline | Pneumatic | 1.47 | 300 | DC5J80 |
| DC6J65 | Internal spline | Pneumatic | 1.61 | 300 | DC6J65 |
| DC6J85 | Internal spline | Pneumatic | 1.47 | 300 | DC6J85 |
| DC6J95 | Internal spline | Pneumatic | 1.41 | 350 | DC6J95 |
| DC7J120 | Internal spline | Pneumatic | 1.37 | 350 | DC7J120 |
| HW25505 | Internal spline | Pneumatic | 1.37 | 350 | HW25505 |
| HW9571 | Internal spline | Pneumatic | 1.4 | 350 | HW9571 |
| 07 Xihu (West Lake) Dis. series | |||||
| SC5T45 | Internal spline | Pneumatic | 1.54 | 300 | SC5P45 |
| SC6E-45 | Internal spline | Pneumatic | 1.47 | 300 | SC6E-45 |
| SC6T53 | Internal spline | Pneumatic | 1.47 | 300 | SC6T53 |
| SC5D | Internal spline | Pneumatic | 1.51 | 300 | SC5D |
| SC6J85 | Internal spline | Pneumatic | 1.42 | 300 | SC6J85 |
| SC7E | Internal spline | Pneumatic | 1.54 | 350 | SC7E |
| 8S-45 | Internal spline | Pneumatic | 1.57 | 300 | SC85-45 |
| SC8S×one | Internal spline | Pneumatic | 1.61 | 300 | SC8S×one |
| SC6S | Internal spline | Pneumatic | 1.48 | 300 | SC6S |
| SC6S×one | Internal spline | Pneumatic | 1.51 | 300 | SC6S×one |
| 08 FAW | |||||
| CA525 | Hand spline chain | Manual | 1.57 | 150 | CA5-25 |
| CA539 | Internal spline | Pneumatic | 1.44 | 200 | CA5-38 |
| CA653 | Internal spline | Pneumatic | 1.47 | 250 | CA6-53 |
| CA6-75 | Internal spline | Pneumatic | 1.47 | 250 | CA6-75 |
| CA6-85 | Internal spline | Pneumatic | 1.47 | 300 | CA6-85 |
| CA6-120 | Internal spline | Pneumatic | 1.38 | 300 | CA-120 |
| CA6-150 | Internal spline | Pneumatic | 1.43 | 300 | CA6-150 |
| CA7-90 | Internal spline | Pneumatic | 1.47 | 350 | CA7-90 |
| CA7-100 | Internal spline | Pneumatic | 1.47 | 350 | CA7-100 |
| 09 Tang Ling HangZhou | |||||
| TC528 | Internal spline | Manual pneumatic | 1.31 | 150 | TC5-28 |
| TC535 | Internal spline | Manual pneumatic | 1.43 | 200 | TC5T35 |
| TC545 | Internal spline | Pneumatic | 1.47 | 250 | TC5-45 |
| TC6T53 | Inner spline | Pneumatic | 1.47 | 250 | TC653 |
| TC650 | Inner spline | Pneumatic | 1.54 | 300 | TC650 |
| JS550 | Inner spline | Pneumatic | 1.47 | 300 | JS550 |
| JS5646 | Internal spline | Pneumatic | 1.53 | 250 | JS646 |
| JS6-950 | Internal spline | Pneumatic | 1.49 | 300 | JS6-950 |
| JS6-750 | Internal spline | Pneumatic | 1.52 | 300 | JS6-750 |
|
Costo de envío:
Flete estimado por unidad. |
To be negotiated |
|---|
| Aplicación: | Motor, Machinery, Agricultural Machinery, Car, Hydraulic Gear Pump Crane ( Oil Pump, Fuel Pump |
|---|---|
| Función: | Distribution Power |
| Dureza: | Superficie dental endurecida |
| Muestras: |
US$ 580/Piece
1 Piece(Min.Order) | Order Sample PTO
|
|---|
| Personalización: |
Disponible
| Solicitud personalizada |
|---|
Contribution of Agricultural Gearboxes to Farming Machinery Versatility
Agricultural gearboxes play a pivotal role in enhancing the overall versatility of farming machinery. Here’s how they contribute:
- Variable Speeds: Agricultural gearboxes enable machinery to operate at different speeds, allowing farmers to adapt to various tasks. For instance, tractors equipped with adjustable gearboxes can efficiently switch between plowing, seeding, and harvesting.
- Torque Management: Gearboxes control torque delivery to match the requirements of different operations. This ensures optimal power transmission and prevents overloading during tasks like tilling or lifting heavy loads.
- Multi-Functionality: Many farming machines are designed to perform multiple tasks. By incorporating versatile gearboxes, these machines can efficiently switch between functions without requiring major modifications.
- Attachment Compatibility: Farm machinery often requires attachments like mowers, plows, or sprayers. Agricultural gearboxes can be designed to accommodate various attachments, increasing the machinery’s utility and adaptability.
- Adjustable Ratios: Some gearboxes allow operators to change gear ratios on-the-fly. This adaptability is essential for tasks that demand precise control over speed and torque, such as precision planting or spraying.
- Efficient Power Distribution: Gearboxes help distribute power from the engine to different components of the machinery, such as wheels, axles, and implements. This efficient power distribution ensures effective utilization of energy.
- Task-Specific Optimization: Different farming tasks have specific requirements. Agricultural gearboxes can be tailored to optimize machinery performance for tasks ranging from soil preparation to crop maintenance.
- Enhanced Maneuverability: Gearboxes can enable machinery to change directions easily and navigate tight spaces. This is especially valuable in tasks like plowing fields or maneuvering within orchards.
- Adapting to Terrain: Versatile gearboxes allow machines to adapt to different terrains, ensuring consistent performance on various surfaces like hills, slopes, or uneven ground.
- Seasonal Flexibility: Farming involves seasonal tasks that vary in demand and complexity. Gearboxes offer the flexibility to optimize machinery for specific tasks during different seasons, enhancing overall efficiency.
Agricultural gearboxes are a cornerstone of farming machinery versatility, enabling farmers to accomplish a wide range of tasks efficiently and effectively.
Gestión de demandas de par variables con cajas de engranajes agrícolas
Las cajas de engranajes agrícolas están diseñadas para manejar las variadas demandas de par asociadas con diferentes tareas en las operaciones agrícolas. Los requisitos de par pueden variar según factores como el tipo de tarea, las condiciones del suelo, el terreno y la velocidad de la maquinaria. Las cajas de engranajes agrícolas están equipadas con características que les permiten adaptarse a estas variadas demandas de par:
- Selección de la relación de transmisión: Las cajas de engranajes agrícolas a menudo vienen con múltiples relaciones de transmisión, lo que permite a los operadores seleccionar la relación adecuada para la tarea en cuestión. Las relaciones de engranajes más bajas proporcionan un mayor par motor para tareas que requieren más fuerza, como el arado o la labranza, mientras que las relaciones de engranajes más altas ofrecen velocidades más altas para tareas como el corte de césped o el transporte.
- Multiplicador de par Algunas cajas de engranajes agrícolas están diseñadas con multiplicadores de par que aumentan el par de salida del motor a las ruedas o al implemento. Estos multiplicadores se activan cuando se necesita un mayor par, ayudando a la maquinaria a manejar cargas pesadas o terrenos difíciles.
- Velocidades ajustables Muchas cajas de engranajes agrícolas permiten a los operadores ajustar la velocidad de la maquinaria para que coincida con los requisitos de par de la tarea. Esta flexibilidad es esencial para tareas que implican operaciones de alto par y baja velocidad, así como operaciones de alta velocidad con necesidades de par más bajas.
- Opciones de Toma de Fuerza (TDF) Las cajas de cambios agrícolas a menudo cuentan con mecanismos de toma de fuerza que permiten la transferencia de potencia del motor a los implementos acoplados. Estos mecanismos pueden diseñarse para proporcionar salidas de par variables que se adapten a diferentes implementos, como rotocultivadores, empacadoras o bombas.
La capacidad de las cajas de engranajes agrícolas para manejar demandas de torque variables es crucial para garantizar operaciones agrícolas eficientes y efectivas. Al ofrecer relaciones de transmisión ajustables, multiplicadores de torque y velocidades adaptables, estas cajas de engranajes permiten a los agricultores optimizar el rendimiento de su maquinaria según los requisitos específicos de cada tarea.
Maintenance Requirements for Agricultural Gearboxes
Maintaining agricultural gearboxes is crucial to ensure the smooth and efficient operation of farming equipment. Proper maintenance helps extend the lifespan of gearboxes and prevents costly breakdowns. Here are the key maintenance requirements:
- Regular Inspections: Conduct routine visual inspections to check for signs of wear, damage, leaks, or misalignment. Regularly inspect gear teeth, seals, and bearings for any issues.
- Lubrication: Proper lubrication is essential to minimize friction and wear in gearboxes. Follow the manufacturer’s guidelines for the type of lubricant to use and the recommended intervals for lubrication.
- Lubricant Checks: Monitor the gearbox’s lubricant levels and quality regularly. Replace or replenish lubricants as needed, and ensure that contaminants are kept out of the lubrication system.
- Tightening Bolts and Fasteners: Check and tighten bolts, nuts, and fasteners to prevent loosening due to vibrations during operation. Loose components can lead to misalignment and premature wear.
- Seal Inspection: Examine seals for leaks and proper sealing. Damaged or worn seals should be replaced promptly to prevent lubricant leakage and the ingress of contaminants.
- Cleaning: Keep gearboxes clean by removing dirt, debris, and residue. Regular cleaning prevents abrasive particles from entering the gearbox and causing damage.
- Alignment: Ensure that gearboxes are properly aligned with connected components, such as shafts and couplings. Misalignment can lead to increased wear and reduced efficiency.
- Temperature Monitoring: Monitor the operating temperature of the gearbox. Abnormal temperature increases may indicate issues like overloading or insufficient lubrication.
- Filter Replacement: If the gearbox has a filtration system, regularly replace or clean the filters to prevent contaminants from entering the gearbox.
- Expert Inspection: Periodically have gearboxes inspected by qualified technicians. They can identify potential problems that may not be visible during routine inspections.
Adhering to these maintenance requirements ensures that agricultural gearboxes remain in optimal condition and contribute to the reliability and efficiency of farming equipment. Regular maintenance not only prevents unexpected downtime but also prolongs the service life of the gearboxes, ultimately benefiting the productivity of agricultural operations.
editor by CX 2023-09-05
