1. Engineering Specifications & Technical Matrix
| Parameterbeschrijving | Technical Value | Standaard / Methode |
|---|---|---|
| Nominaal koppelvermogen | 1,450 Nm – 3,200 Nm | ISO 6336 |
| Peak Shock Load Factor | 2.4x Nominal | AGMA 2001-D04 |
| Input Speed Range | 540 / 1000 RPM | Standaard PTO |
| Reductieverhouding | 1:1, 1:1.35, 1:2.1 | Configurable |
| Huisvestingsmateriaal | QT450-10 Ductile Iron | ASTM A536 |
| Gear Hardness (Tooth Surface) | HRC 58-62 | Carburizing & Quenching |
| Lubrication Method | Forced Splash / Oil Bath | Self-Contained |
| Oliecapaciteit | 4,5 Liter | Synthetic Gear Oil |
| Ingress Protection-classificatie | IP67 | IEC 60529 |
| Bedrijfstemperatuurbereik | -25°C tot +85°C | Ambient Optimized |
| Schachtmateriaal | 42CrMo Alloy Steel | GB/T 3077 |
| Vibration Threshold (RMS) | < 4.5 mm/s | ISO 10816 |
| Noise Level (1m) | < 82 dB(A) | Full Load Test |
| Vermoeiingslevensduur (L10) | 12.000 Uur | Calculated B10 |
| Eccentric Weight Compatibility | Up to 25kg / side | Modular Interface |
| Paint Standard | Epoxy Powder Coat | Corrosion Class C3 |
| __OPENROUTER_FAILED__ | Multi-positional | 360° Permitted |
| Afichtingstype | Viton High-Temp Lip | Double-Guard Profile |
| Input Spline Specification | 1-3/8″ Z6 / Z21 | DIN 9611 |
| Efficiëntiebeoordeling | 96.5% | Mechanical Loss Test |
| Thermisch vermogenslimiet | 45 kW | Continuous at 40°C |
| Terugslag precisie | 12′ – 18′ | Standard Grade |
| Lagers Merk | SKF / NSK / Timken | OEM Quality |
| Weight (Approx) | 38.5 kg | Dry Weight |
| Case Pressure Vent | Desiccant Filtered | Dual-Phase Flow |
| Casting Tolerance | CT7 Grade | ISO 8062 |
| Standard Compliance | CE / NR-12 | Global Export Grade |
2. Core Advantages & Field Application Scenarios
In the intensive potato farming regions of Minas Gerais and Paraná, the efficiency of a harvest is dictated not just by speed, but by the precision of soil separation. The Vibration / Shaker Mechanism Gearbox is the critical heart of modern harvesters and planters. It converts high-speed PTO power into controlled, rhythmic oscillations that shake the soil loose from the tubers without bruising the delicate potato skin.
Our ever-power series is designed specifically to withstand the abrasive “Latossolo” (Red Soil) found in central Brazil. These gearboxes handle the high inertial loads of oscillating sieves and shaker bars, ensuring that every potato is lifted clean and undamaged. By integrating advanced eccentric-weight balancing and high-thermal-capacity housings, ever-power provides a solution that maximizes uptime during the narrow harvest windows of the winter “safra.”
- ✔
High Torque Resilience: Optimized for sudden resistance changes in heavy clay soils. - ✔
Bruise-Free Technology: Precise frequency control to minimize mechanical impact on crops. - ✔
Tropicalized Sealing: Dust-proof and moisture-resistant seals for Brazil’s humid harvest environments.
3. Anatomical Position & Operational Dynamics
The shaker gearbox is typically mounted at the front of the separation conveyor or directly on the vibrating frame of the potato harvester. Its primary role is to drive the eccentric shaft. As the gearbox receives rotational energy from the tractor’s PTO shaft, the internal spiral bevel or spur gears transfer this motion to an output shaft equipped with offset weights or a crank mechanism.
The resulting reciprocating vibration is what allows the soil to fall through the conveyor chains while the potatoes remain on top. This isn’t just “shaking”; it is a tuned oscillation designed to match the resonance of the soil type. In Brazil’s moist clay-heavy soils, the frequency must be higher to “shear” the soil’s surface tension, a task that ever-power gearboxes perform with surgical precision.
Key Functional Roles:
- Inertial Balancing: Counteracting the massive “kickback” of heavy shaker bars.
- Synchronized Drive: Ensuring both sides of the harvester vibrate in phase to prevent frame fatigue.
- Torque Transformation: Converting high PTO speeds to the 300-450 cycles per minute required for effective separation.
4. [Brazil] Mato Grosso & Paraná Operating Conditions Field Study
“Working the fields in Castro, PR, or Guarapuava requires more than just power; it requires endurance against heat and abrasive dust.”
In Brazil, potato harvesting often occurs during periods of extreme temperature fluctuation. A standard gearbox might fail due to “thermal runaway” as internal friction combines with 40°C ambient heat. eeuwige kracht gearboxes overcome this with:
Enhanced Heat Dissipation
Wider surface fins increase convective cooling by 22% compared to flat-wall designs.
Abrasive Resistance
The “Terra-Seal” system uses a multi-labyrinth path to block the fine silica dust found in Brazilian interior soils.
Bio-Lube Compatibility
Compatible with locally sourced, biodegradable agricultural lubricants often required by environmental regulations in southern states.
5. Competitive Landscape: Why Choose ever-power?
| Functie | ever-power Shaker Series | Standard Market Units |
|---|---|---|
| Shaft Fatigue Resistance | High-Impact 42CrMo (Standard) | Standard Carbon Steel |
| Sealing Logic | Dual-Lip Viton + Dust Cap | Single NBR Lip Seal |
| Casting Density | Vacuum Degassed Ductile Iron | Standard Grey Cast Iron |
| Maintenance Interval | 1,500 Operating Hours | 500 – 800 Hours |
Disclaimer: The comparison above is based on internal testing and publicly available technical data. Competitor specifications may vary by region and model year. This information is for technical reference only and does not constitute a legal endorsement of specific brand superiority.
6. Universal Compatibility & Replacement Guide
Our ever-power vibration gearboxes are engineered as direct-fit or adaptable replacements for major global brands, ensuring your harvest never stops. We provide drop-in solutions for equipment from:
Dewulf™
AVR™
Standen™
Spudnik™
Double L™
NOTICE: All manufacturer names, symbols, and descriptions are used for reference purposes only. It is not implied that any part listed is the product of these manufacturers. ever-power units are high-performance aftermarket equivalents designed to match or exceed OEM specifications.
7. [Brazil] Regulatory Compliance & Technical Standards
Navigating the Brazilian agricultural landscape requires strict adherence to safety and environmental standards. Our gearboxes distributed via Agrinulear Nucleo Agro are fully compliant with:
- NR-12 (Brazil): Safety in Machinery and Equipment. Includes mandatory guarding interfaces and emergency stop compatibility for integrated drive systems.
- INMETRO Certification: For imported mechanical components ensuring metallurgical integrity.
- EU Machinery Directive (CE): Providing a baseline for global safety standards, facilitating easy export for Brazilian machinery OEMs using ever-power components.
8. Global Success Stories: Solving the Vibration Dilemma
Case #1: Brazil (São Gotardo, MG) – High-Stoniness Soil
Challenge: Frequent output shaft breakage on a 2-row harvester due to impact with hidden basalt rocks.
Oplossing: ever-power installed the Shock-Guard series with a specialized friction clutch integrated directly into the shaker gearbox input.
Resultaat: “Since switching to ever-power through Agrinulear, our downtime dropped from 3 days per month to zero. The clutch slips when we hit a rock, saving the internals.” – Flavio S., Farm Manager.
Case #2: Germany (Lower Saxony) – Precision Organic Farming
Challenge: Bruising on early-season table potatoes caused by erratic shaker frequencies.
Oplossing: Custom gear ratios to lower the oscillation amplitude while maintaining soil throughput.
Resultaat: Bruise rates dropped by 15%, increasing the percentage of premium-grade tubers for retail.
Case #3: India (Uttar Pradesh) – Smallholder Efficiency
Challenge: Overheating gearboxes on single-row potato diggers operated by low-HP tractors.
Oplossing: High-efficiency spiral bevel gears reduced mechanical drag, allowing 45HP tractors to operate comfortably.
Case #4: USA (Idaho) – 24/7 Harvest Intensity
Challenge: Bearing failure due to dust ingress in high-speed, multi-row harvester complexes.
Oplossing: ever-power’s “Triple-Seal” system with centralized lubrication ports for easy daily checks.
Case #5: Egypt (Desert Reclamation) – Abrasive Sand
Challenge: Rapid wear of gear teeth caused by microscopic sand particles entering the oil casing.
Oplossing: Magnetic drain plugs and hardened case-hardening (HRC 62) on all contact surfaces.
9. Industry Trends: The Future of Potato Harvest Separation
The next decade of agricultural transmission will be defined by Intelligent Vibration Control (IVC). We are already prototyping gearboxes with integrated sensors that communicate directly with tractor ISOBUS systems to adjust shaker frequency in real-time based on soil moisture data.
In Brazil, the move towards “Digital Agriculture” means components must be more than just mechanical; they must be data-ready. ever-power is leading this charge with modular sensor-ports standard on all new B-series shaker units.
10. Why Choose Us?
1. Uitgebreide OplossingenWij begrijpen het belang van betrouwbare, compatibele componenten in uw machines. Door zowel landbouwtransmissies als aftakastoestellen aan te bieden, zorgen wij ervoor dat elk onderdeel perfect samenwerkt, waardoor de efficiëntie wordt verbeterd en stilstand wordt verminderd.
2. Gebouwd voor DuurzaamheidOnze PTO-assen zijn vervaardigd uit hoogwaardige materialen om de zwaarste werkomstandigheden te weerstaan. Of u nu zware machines aandrijft of landbouwmachines op kleine schaal onderhoudt, onze PTO-assen bieden de kracht en betrouwbaarheid die u nodig heeft.
3. Naadloze Integratie: Onze aftakastoeren zijn ontworpen als een perfecte aanvulling op onze landbouwtransmissies en zorgen voor een soepele krachtoverbrenging, waardoor de algehele prestaties van uw apparatuur verbeteren. Deze naadloze integratie stelt u in staat de productiviteit te maximaliseren en mechanische storingen te verminderen.
4. Aanpasbare opties: Wij bieden een breed scala aan aftakastoepassingen, van standaardconfiguraties tot op maat gemaakte oplossingen, om ervoor te zorgen dat aan uw specifieke behoeften wordt voldaan. Of u nu werkt in de landbouw, de bouw of een ander gerelateerd vakgebied, wij hebben de perfecte aftakas voor u.
5. KosteneffectiefDoor zowel landbouwversnellingsbakken als aftakastoestellen van één enkele leverancier te betrekken, bespaart u op kosten en stroomlijnt u uw inkoopproces. Onze producten zijn ontworpen om langdurige waarde te bieden, waardoor de noodzaak voor frequente vervangingen afneemt.
6. Betrouwbare Service en OndersteuningOns team van experts staat altijd klaar om te helpen met productselectie, installatie en onderhoudsadvies. We streven ernaar ervoor te zorgen dat uw machines soepel en efficiënt draaien, zodat u zich zonder onderbrekingen op uw werk kunt concentreren.
11. Related Products-PTO Shaft
Bij EVER-POWER richten we ons niet alleen op het produceren van hoogwaardige landbouwtransmissies, maar ook op het vervaardigen van een cruciaal onderdeel dat diverse landbouw- en industriële toepassingen aandrijft – de aftakas (PTO-as). Onze aftakassen zijn ontworpen om te voldoen aan de veeleisende eisen van moderne landbouwmachines en bieden duurzaamheid en efficiëntie voor een breed scala aan werkzaamheden. Compatibel met lokale Braziliaanse industrieën.
Onze PTO-as producttypes omvatten: PTO as voor schijvenmaaier, PTO-as voor voermengers, PTO as voor klepelmaaiers, PTO-as voor ronde balenpersen, en PTO as voor vierkante balenpersen.
Veelgestelde vragen:
Q1: How does the cost of ever-power gearboxes compare for large-scale potato farm operations in Brazil?
A1: Our total cost of ownership is significantly lower. While the initial investment is competitive with premium brands, the extended 1,500-hour service interval and reduced spare part consumption in abrasive soil conditions lead to a 30% reduction in long-term operational costs compared to standard market units.
Q2: What is the lead time for custom ratio shaker gearboxes for my specific potato harvester fleet?
A2: Agrinulear Nucleo Agro maintains a strategic stock of core modules in Brazil. For standard ratios, we offer 48-hour shipping. Custom gear configurations typically have a 4-6 week lead time from our global production facilities, supported by full technical consultancy during the design phase.
Q3: Can your shaker gearboxes handle the high humidity and salt air of coastal potato growing regions?
A3: Yes. We offer a specialized “Marine-Spec” finish featuring an epoxy primer and polyurethane topcoat that exceeds 500 hours of salt spray testing, combined with stainless steel hardware to prevent seizing in corrosive environments.
Q4: How do I calculate the correct torque requirement for a multi-row shaker assembly?
A4: Torque requirement is a factor of the shaker bar mass, the coefficient of soil friction, and the desired oscillation frequency. Our engineers provide a free computational simulation using your machine’s weight and speed parameters to ensure the gearbox is neither underpowered nor inefficiently oversized.
Q5: Are replacement parts for ever-power gearboxes easily available in rural Mato Grosso?
A5: Absolutely. We operate a network of certified distributors across Brazil. Common wear items like seals and bearings are standardized to international sizes, but we always recommend using genuine ever-power “V-Series” components for maximum warranty protection.
Q6: Does the vibration mechanism require a specific type of synthetic oil for high-temperature Brazilian harvests?
A6: We recommend an ISO VG 220 full-synthetic gear oil with EP (Extreme Pressure) additives. This ensures the film thickness remains stable even when the gearbox is under heavy inertial load in 40°C ambient temperatures.
Q7: Which PTO shaft safety guards are compatible with the ever-power vibration gearbox interface?
A7: All ever-power gearboxes are designed to accommodate standard Category 4 to Category 8 PTO safety guards. We provide a flanged mounting point specifically for securing the safety chain and guard cone, ensuring full NR-12 compliance.
Q8: When replacing a competitor’s gearbox, do I need to change my mounting brackets?
A8: We aim for “Drop-In” compatibility. Our universal mounting flange features multi-slot bolt patterns that match 85% of existing harvesters from Grimme, Spudnik, and AVR. If your machine is custom-built, we provide CAD files to help you fabricate a simple adapter plate.
Q9: How do you prevent internal gear cavitation in high-speed shaker applications?
A9: We use Pressure-Balanced Flow. The internal geometry of the housing is designed to direct oil spray precisely into the mesh zone, preventing dry spots and air pockets that occur during rapid reciprocating movements.
Q10: Where can I find a local supplier for ever-power agricultural transmission components in Paraná?
A10: Agrinulear Nucleo Agro is our master agency. You can visit our regional hub or contact our mobile service teams who provide on-site technical audits for fleets across Curitiba, Ponta Grossa, and Cascavel.
Redacteur: PXY
