Beschrijving
Artikelomschrijving
78mm ZDR Series High JCPT Planetair Gearbox For Servo Motor
Artikelomschrijving
ZDR collection planetary gearbox has adopted helical equipment design, so the meshing of gears can be smoother. This series has a double-supported and sealed structure, simpler to put in for JCPTers. It is broadly employed in linear manipulators, packaging machinery, assembly traces and and so forth. The maximum backlash of the ZDR collection is less than 5 arc.min and the reduction ratio handles three~81.
The Product Advantages of Planetary Gearbox:
one.Versatile framework layout, in line with a variety of working problems.
2.Ring gear processing technology: Using interior equipment slotting device and hobbing machine the precision of ring gear soon after processing can achieve GB7.
three.Hardened gear secondary scraping technologies: secondary high-speed dry chopping of equipment gets rid of gear deformation induced by warmth treatment method. Gear precision can achieve GB6.
four.JCPT backlash tests.
Requirements
Outline Drawing:
1)When input velocity is 3000rpm:
| Product NO. | Reductieverhouding | Motor | Output Shaft Speed (rpm) | Standard Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Internal Minute Ohnertia Of Input Shaftconversion (x10-four kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 78ZDR | 3 | 750 | a thousand | 6.37 | 19.3 | 784 | 392 | .913 | 6.86 | twenty.six |
| 5 | four hundred | 600 | 5.39 | 16.2 | 980 | 490 | .363 | six.57 | 19.7 | |
| 750 | 10.seven | 32.1 | .713 | 11.5 | 34.3 | |||||
| negen | 200 | 333 | 3.seventy two | eleven.three | 1180 | 588 | .275 | nine.70 | 29.2 | |
| 400 | nine.51 | 28.5 |
Note1) The second of enter shaft conversion is only obtained from the reducer, so it does not incorporate moment of inertia of the motor.
Note2) The max. input pace is 5000rpm. Usually set to 3000rpm or significantly less.
Note3) The permissble radial load is indicated on the center of the output shaft.
Note4) All values are inside of the variety corresponding to helical equipment.
two)When input pace is 2000rpm
| Solution NO. | Reductieverhouding | Motor | Output Shaft Velocity (rpm) | Normal Output Torque (N.m) | Instantaneous max.Output Torque (N.m) | Permissible Radial Load (N) | Permissible Axial Load (N) | Inside Moment Ohnertia Of Enter Shaftconversion (x10-4 kg.m2) | Perrmissible Output Torque (N.m) | Instantaneous Max. Permissible Output Torque (N.m) |
| 78ZDR | drie | four hundred | 666 | 5.01 | 15. | 900 | 450 | .913 | six.86 | twenty.6 |
| 5 | two hundred | four hundred | 3.eighty two | elf.5 | 1120 | 560 | .363 | six.57 | 19.seven | |
| four hundred | eight.35 | twenty five.one | .713 | elf.5 | 34.3 | |||||
| 9 | 100 | 222 | 2.35 | zeven.04 | 1340 | 670 | .275 | nine.70 | 29.2 | |
| two hundred | 6.64 | 19.9 | ||||||||
| vijftien | 100 | 133 | three.ninety one | 11.seven | 1670 | 833 | .300 | 16.2 | 48.six | |
| two hundred | 11.one | 33.2 | ||||||||
| 20 | honderd | honderd | 5.73 | 17.2 | 1790 | 895 | .294 | 21.1 | 63.3 | |
| two hundred | fourteen.eight | forty four.four | ||||||||
| vijfentwintig | honderd | 80. | 7.16 | 21.5 | 1670 | 833 | .288 | 21.7 | 64.nine | |
| 200 | eighteen.5 | fifty five.four | ||||||||
| 35 | 50 | fifty seven. | 4.forty three | 13.3 | 1900 | 950 | .262 | fifteen.five | forty six.six | |
| honderd | 12, zeven | 38.1 | ||||||||
| 45 | 50 | 44.4 | five.eighty | 17.four | 1670 | 833 | .5715 | nine.fifty | 28.six | |
| 81 | vijftig | 24.6 | nine.70 | 29.2 | 1670 | 833 | .5710 | nine.70 | 29.two |
Note1) The second of enter shaft conversion is only obtained from the reducer, so it does not include moment of inertia of the motor.
Note2) The permissble radial load is indicated on the center of the output shaft.
Note3) All values are within the range corresponding to helical gear.
System & Elements:
Double assist mechanism
1.The planetary gear is placed in the middle of the output shaft.
two.The output shaft bearing is placed at each finishes of the planetary gear.
three.Individual solar equipment and coupling.
Compact output shaft mechanism
It adopts the design of output shaft built-in method, compact construction, large rigidity, and it can endure huge influence. Spot the input coupling and the sunlight equipment at the centre of the output shaft to enhance the concentricity of the factors, therefore efficiently controlling the gear clearance and enhancing the backlash of the whole gearbox.
Total needle composition
The internal bearing of the planetary gear adopts a complete-needle design and style, the inner hole is made by a grinding process, the surface area hardness is HRC60, and the cylindricity is considerably less than .003mm.
Ring gear construction
The integral structure of the ring equipment and the output flange increases its rigidity and reduces misassembly.
Related Goods
Click on for Related Products:
Firm Profile
Veelgestelde vragen
Q: What’re your major products?
A: We currently generate Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Higher JCPT Planetary Gear Box and so forth. You can check the requirements for previously mentioned motors on our website and you can e-mail us to advocate required motors per your specification as well.
Q: How to decide on a ideal motor?
A:If you have motor pictures or drawings to present us, or you have in depth specs like voltage, pace, torque, motor dimensions, doing work manner of the motor, required lifetime and noise level and so on, you should do not hesitate to permit us know, then we can suggest suitable motor for each your request appropriately.
Q: Do you have a JCPTized services for your common motors?
A: Of course, we can JCPTize for each your request for the voltage, pace, torque and shaft dimensions/form. If you want extra wires/cables soldered on the terminal or need to include connectors, or capacitors or EMC we can make it too.
Q: Do you have an person design provider for motors?
A: Yes, we would like to design and style motors separately for our JCPTers, but it might need some mold creating value and layout cost.
Q: What’s your lead time?
A: Typically talking, our typical standard item will need to have fifteen-30days, a little bit for a longer time for JCPTized goods. But we are really versatile on the lead time, it will depend on the particular orders.
Make sure you get in touch with us if you have comprehensive requests, thank you !
